Industrial Series
Available with or without insulation, the Industrial Steel overhead doors combine performance and reliability for a range of industrial applications.
Key Features & Specifications
Features & Benefits
Model 520/524/525
| Panel Design: | 2" thick roll formed ribbed steel | |
| Steel Gauge: | 20 ga (.034" min) - Model 520, 24 ga (.022" min) - Model 524and 25 ga (.019 min) - Model 525 ribbed steel sections | |
| Joint Design: | Tongue and groove | |
| Thickness/Insulation: | No insulation | |
| Hardware: | 14 gauge hinges, commerical 10-ball steel rollers, 10,000 cycle torsion springs | |
| Colors: | Pre-painted white or brown (520/525) Pre-painted white, brown, tan or gray (524) | |
| Limited Warranty: | 10-year finish against rust / one-year material & workmanship |
Model 520S

| Panel Design: | 2" thick roll formed stucco embossed ribbed steel |
| Steel Gauge: | 20 gauge (.034" min) for maximum dent resistance |
| Joint Design: | Tongue and groove |
| Thickness /Insulation | 1-3/8" thick polystyrene insulation with pre-painted 30 gauge steel backcover |
| Thermal Conductivity | R-Value 6.6* |
| Paint System: | 3-stage paint process delivers maintenance free finish that resists rust perforation |
| Colors | Pre-painted white or brown |
| Limited Warranty: | 10-year paint / one-year material & workmanship |
Model 522/522S

| Panel Design: | 2" thick roll formed stucco embossed flush steel |
| Steel Gauge: | 20 gauge (.034" min) for maximum dent resistance |
| Joint Design: | Tongue and groove |
| Thickness /Insulation | 1-3/8" thick polystyrene insulation with pre-painted 30 gauge steel backcover |
| Thermal Conductivity | R-Value 6.6* |
| Paint System: | 3-stage paint process delivers maintenance free finish that resists rust perforation |
| Colors | Pre-painted white or brown |
| Limited Warranty: | 10-year paint / one-year material & workmanship |
Model 524V/524S

| Panel Design: | 2" thick roll formed stucco embossed steel |
| Steel Gauge: | 24 gauge (.022" min) ribbed steel sections |
| Joint Design: | Tongue and groove |
| Thickness /Insulation | 1-3/8" thick polystyrene insulation with polyethylene vinyl backcover (524V) 1-3/8" thick polystyrene insulation with pre-painted 30 gauge steel backcover (524S) |
| Thermal Conductivity | R-Value 6.6* |
| Paint System: | 3-stage paint process delivers maintenance free finish that resists rust perforation |
| Colors | Pre-painted white, brown, tan, black or gray |
| Limited Warranty: | 10-year paint /one-year material & workmanship |
Model 525V/525S

| Panel Design: | 2" thick roll formed smooth steel with combination of deep minor ribs |
| Steel Gauge: | 25 gauge (.019" min) |
| Joint Design: | Tongue and groove |
| Thickness /Insulation | 1-3/8" thick polystyrene insulation with polyethylene vinyl backcover (525V) 1-3/8" thick polystyrene insulation with pre-painted 30 gauge steel backcover (525S) |
| Thermal Conductivity: | R-Value 6.6* |
| Paint System: | 3-stage paint process delivers maintenance free finish that resists rust perforation |
| Colors: | Pre-painted white or brown |
| Limited Warranty: | 10-year paint / one-year material & workmanship |
Model 664
| Panel Design: | 1 7/8" thick roll formed steel | |
| Steel Gauge: | 24 gauge (.22" min) raised panel door | |
| Joint Design: | Tongue and groove | |
| Thickness & Insulation | No insulation | |
| Hardware: | 14 gauge hinges, commerical 10-ball steel rollers, 10,000 cycle torsion springs | |
| Colors: | Pre-painted snowmist white, chocolate, brown, almond, sandstone, or desert tan. | |
| Limited Warranty: | 10-year finish against rust through / one-year material & workmanship |
Model 664V
| Panel Design: | 1-7/8" thick woodgrain embossed raised panel steel |
| Steel Gauge: | 24 gauge (.022" min) ribbed steel sections |
| Joint Design: | Tongue-and-groove |
| Thickness /Insulation | 1-3/8" thick polystyrene insulation with polyethylene vinyl backcover |
| Thermal Conductivity | R-Value 6.3* |
| Paint System | 3-stage paint process delivers maintenance free finish that resists rust perforation |
| Colors | Pre-painted white, brown, tan or gray; Trinar white or beige |
| Limited Warranty: | 10-year paint / one-year material & workmanship |
*Calculated garage door section R-value is in accordance with DASMA TDS-163.
Springs & Hardware
Commercial Hardware
Commercial doors are designed with hardware to meet demanding applications of commercial building usage. All commercial doors are provided with the following hardware as standard. For additional upgraded hardware see “Options” tab.
- 14 gauge hinges
- Commercial 10 ball steel rollers with options for nylon tire rollers
- 10,000 cycle torsion springs
- Steel step plate and lift handle for easy operation
- Inside slide lock for increase security
- 19 gauge steel hinge support plates
- 18-gauge single end stiles; 16-gauge double end stiles
- Galvanized aircraft cables with 7:1 safety factory
- 2” or 3” track in a variety of configurations to meet building design requirements
Commercial Track Applications
In commercial settings, space utilization and space constraints are important factors in choosing the correct hardware configuration for your application. Clopay track offerings and options enable you to make the most efficient use of available space. Options include standard lift, low head room front or rear mount, follow the roof pitch, full vertical or combination of these options. Learn more.
Commercial Torsion Springs
Designed to counterbalance even the largest doors, commercial torsion spring assemblies can be designed for Industry standard 10,000 cycles or can be upgraded to 25,000, 50,000 or 100,000 expected life cycles. Click here for details
Brochures
Specs & Downloads
| Model | BIM | Shop Drawing | Specs | Installation Manual | Warranty |
|---|---|---|---|---|---|
| Model 520 | RFARFARFA | PDFDXFDWG | RTFPDFDOC | ||
| Model 522 | PDFRTFDOC | ||||
| Model 520S | RFARFA | PDFDXFDWG | RTFPDFDOC | ||
| Model 524 | RFARFARFA | PDFDXFDWG | RTFDOCPDF | ||
| Model 524S | RFARFARFA | PDFDXFDWG | RTFPDFDOC | ||
| Model 524V | RFARFARFA | PDFDXFDWG | RTFPDFDOC | ||
| Model 522S | RTFDOCPDF | ||||
| Model 525 | RFARFARFA | PDFDXFDWG | RTFPDFDOC | ||
| Model 525S | RFARFARFA | PDFDXFDWG | RTFPDFDOC | ||
| Model 525V | RFARFARFA | PDFDXFDWG | RTFPDFDOC | ||
| Model 664 | PDFDXFDWG | RTFPDFDOC | |||
| Model 664V | PDFDXFDWG | RTFPDFDOC | |||
Best suited for
HOME STYLES
Designed to complement a range of architectural styles while enhancing the home’s overall curb appeal.
WESTERN WA CONDITIONS
Material and finish options can be selected with Western Washington’s damp, changing conditions in mind.
WIND & EXPOSURE
For more exposed properties, explore construction and configuration options suited to local wind conditions.
Installed locally
Canyon Ridge doors our crew has installed on Western Washington homes.
[Finish / style]
City, WA
[Finish / style]
City, WA
[Finish / style]
City, WA
See how this looks on your home
Want to see how this looks on your home? We’ll come measure and show you options.
Ask us about options for financing.
Frequently Asked Questions
Do you offer same-day garage door repair in Olympia?
When your garage door stops working, we understand that waiting several days may not be practical. Our team provides garage door repair in Olympia and surrounding areas, including help with broken springs, doors off track, damaged cables, and opener problems. Call us to discuss your situation and available service options.
Do you offer same-day garage door repair in Olympia?
When your garage door stops working, we understand that waiting several days may not be practical. Our team provides garage door repair in Olympia and surrounding areas, including help with broken springs, doors off track, damaged cables, and opener problems. Call us to discuss your situation and available service options.
Do you offer same-day garage door repair in Olympia?
When your garage door stops working, we understand that waiting several days may not be practical. Our team provides garage door repair in Olympia and surrounding areas, including help with broken springs, doors off track, damaged cables, and opener problems. Call us to discuss your situation and available service options.



















